philou83

Super merci j’ai fait les modifs, je testerai ça ce soir

Salut Donc hier soir j’ai édité ton Yaml, avec les id et le fonctionnement est nickel, merci, par contre j’ai certainement un problème au niveau de la détection nocturne car il faut que je m’approche à 1m ou 2m pour qu’elle me détecte, afin que les lumières s’éclairent, j’ai fait le test de jour et la a plus de 10m Sur eWeLink je suis en vision de nuit intelligente avec détection humain et objets ( dans le doute) Merci à toi

Merci pour ta réponse rapide, j’essaye ce soir en rentrant

Bonjour à vous tous Je vous expose mon petit problème J’ai une caméra sonoff CAM-B1P ou j’ai programmé le détection humaine et objets avec vision automatique nocturne, lorsque elle détecte me commande via home assistant un commutateur sonoff ZBMINIR2, afin de m’allumer des lumières Lorsque je fait mon automatisation de sans condition, de jour cela fonctionne parfaitement et dés que je mets la condition de coucher du soleil, plus rien ne fonctionne J’ai peut etre manqué quelques chose Avez-vous une idée à me suggérer Merci à vous. Philippe.

Comment fait-on pour clôturer

Je te remercie, c’est bon ça fonctionne à merveille, c’est super sympa de ta part

Il y a eu une avancée je n’ai plus onboarding inscrit il veut démarrer zigbee2mqtt mais il ne peut pas démarrer à dans module complémentaire zigbee2mqtt lorsque je le connecte il ne prend pas de plus voix mon nouveau journal [2026-01-12 11:50:17] [32minfo[39m: zh:ember:uart:ash: ======== ASH Adapter reset ======== [2026-01-12 11:50:17] [32minfo[39m: zh:ember:uart:ash: RTS/CTS config is off, enabling software flow control. [2026-01-12 11:50:17] [32minfo[39m: zh:ember:uart:ash: Serial port opened [2026-01-12 11:50:17] [32minfo[39m: zh:ember:uart:ash: ======== ASH starting ======== [2026-01-12 11:50:17] [31merror[39m: zh:ember:uart:ash: Received frame with CRC error [2026-01-12 11:50:17] [31merror[39m: zh:ember:uart:ash: Received ERROR from adapter while connecting, with code=ERROR_EXCEEDED_MAXIMUM_ACK_TIMEOUT_COUNT. [2026-01-12 11:50:18] [32minfo[39m: zh:ember:uart:ash: ======== ASH connected ======== [2026-01-12 11:50:18] [32minfo[39m: zh:ember:uart:ash: ======== ASH started ======== [2026-01-12 11:50:18] [32minfo[39m: zh:ember:ezsp: ======== EZSP started ======== [2026-01-12 11:50:18] [32minfo[39m: zh:ember: Adapter EZSP protocol version (14) lower than Host. Switched. [2026-01-12 11:50:18] [32minfo[39m: zh:ember: Adapter version info: {"ezsp":14,"revision":"8.0.2 [GA]","build":397,"major":8,"minor":0,"patch":2,"special":0,"type":170} [2026-01-12 11:50:19] [32minfo[39m: zh:ember: [STACK STATUS] Network up. [2026-01-12 11:50:19] [32minfo[39m: zh:ember: [INIT TC] Adapter network matches config. [2026-01-12 11:50:19] [32minfo[39m: zh:ember: [CONCENTRATOR] Started source route discovery. 1247ms until next broadcast. [2026-01-12 11:50:19] [32minfo[39m: z2m: zigbee-herdsman started (resumed) [2026-01-12 11:50:19] [32minfo[39m: z2m: Coordinator firmware version: '{"meta":{"build":397,"ezsp":14,"major":8,"minor":0,"patch":2,"revision":"8.0.2 [GA]","special":0,"type":170},"type":"EmberZNet"}' [2026-01-12 11:50:19] [32minfo[39m: z2m: Currently 0 devices are joined. [2026-01-12 11:50:19] [32minfo[39m: z2m: Connecting to MQTT server at mqtts://core-mosquitto [2026-01-12 11:50:19] [31merror[39m: z2m: MQTT failed to connect, exiting... () [2026-01-12 11:50:19] [32minfo[39m: z2m: Stopping zigbee-herdsman... [2026-01-12 11:50:20] [32minfo[39m: zh:controller: Wrote coordinator backup to '/config/zigbee2mqtt-edge/coordinator_backup.json' [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: ASH COUNTERS since last clear: [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Total frames: RX=52, TX=92 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Cancelled : RX=0, TX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: DATA frames : RX=46, TX=44 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: DATA bytes : RX=638, TX=481 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Retry frames: RX=4, TX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: ACK frames : RX=0, TX=47 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: NAK frames : RX=0, TX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: nRdy frames : RX=0, TX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: CRC errors : RX=1 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Comm errors : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Length < minimum: RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Length > maximum: RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Bad controls : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Bad lengths : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Bad ACK numbers : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Out of buffers : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Retry dupes : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Out of sequence : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: ACK timeouts : RX=0 [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: Port closed, error=null [2026-01-12 11:50:20] [32minfo[39m: zh:ember:uart:ash: ======== ASH stopped ======== [2026-01-12 11:50:20] [32minfo[39m: zh:ember:ezsp: ======== EZSP stopped ======== [2026-01-12 11:50:20] [32minfo[39m: zh:ember: ======== Ember Adapter Stopped ======== [2026-01-12 11:50:20] [32minfo[39m: z2m: Stopped zigbee-herdsman [11:50:24] INFO: [32mPreparing to start...[0m [11:50:24] INFO: [32mSocat not enabled[0m [11:50:25] INFO: [32mStarting Zigbee2MQTT...[0m Starting Zigbee2MQTT without watchdog. [2026-01-12 11:50:30] [32minfo[39m: z2m: Logging to console, file (filename: log.log) [2026-01-12 11:50:30] [32minfo[39m: z2m: Starting Zigbee2MQTT version 2.7.2 (commit #unknown) [2026-01-12 11:50:30] [32minfo[39m: z2m: Starting zigbee-herdsman (8.0.1) [2026-01-12 11:50:31] [32minfo[39m: zh:ember: Using default stack config. [2026-01-12 11:50:31] [32minfo[39m: zh:ember: ======== Ember Adapter Starting ======== [2026-01-12 11:50:31] [32minfo[39m: zh:ember:ezsp: ======== EZSP starting ======== [2026-01-12 11:50:31] [32minfo[39m: zh:ember:uart:ash: ======== ASH Adapter reset ======== [2026-01-12 11:50:31] [32minfo[39m: zh:ember:uart:ash: RTS/CTS config is off, enabling software flow control. [2026-01-12 11:50:31] [32minfo[39m: zh:ember:uart:ash: Serial port opened [2026-01-12 11:50:31] [32minfo[39m: zh:ember:uart:ash: ======== ASH starting ======== [2026-01-12 11:50:32] [32minfo[39m: zh:ember:uart:ash: ======== ASH connected ======== [2026-01-12 11:50:32] [32minfo[39m: zh:ember:uart:ash: ======== ASH started ======== [2026-01-12 11:50:32] [32minfo[39m: zh:ember:ezsp: ======== EZSP started ======== [2026-01-12 11:50:32] [32minfo[39m: zh:ember: Adapter EZSP protocol version (14) lower than Host. Switched. [2026-01-12 11:50:32] [32minfo[39m: zh:ember: Adapter version info: {"ezsp":14,"revision":"8.0.2 [GA]","build":397,"major":8,"minor":0,"patch":2,"special":0,"type":170} [2026-01-12 11:50:33] [32minfo[39m: zh:ember: [STACK STATUS] Network up. [2026-01-12 11:50:33] [32minfo[39m: zh:ember: [INIT TC] Adapter network matches config. [2026-01-12 11:50:33] [32minfo[39m: zh:ember: [CONCENTRATOR] Started source route discovery. 1245ms until next broadcast. [2026-01-12 11:50:33] [32minfo[39m: z2m: zigbee-herdsman started (resumed) [2026-01-12 11:50:33] [32minfo[39m: z2m: Coordinator firmware version: '{"meta":{"build":397,"ezsp":14,"major":8,"minor":0,"patch":2,"revision":"8.0.2 [GA]","special":0,"type":170},"type":"EmberZNet"}' [2026-01-12 11:50:33] [32minfo[39m: z2m: Currently 0 devices are joined. [2026-01-12 11:50:33] [32minfo[39m: z2m: Connecting to MQTT server at mqtts://core-mosquitto [2026-01-12 11:50:33] [31merror[39m: z2m: MQTT failed to connect, exiting... () [2026-01-12 11:50:33] [32minfo[39m: z2m: Stopping zigbee-herdsman... [2026-01-12 11:50:34] [32minfo[39m: zh:controller: Wrote coordinator backup to '/config/zigbee2mqtt-edge/coordinator_backup.json' [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: ASH COUNTERS since last clear: [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Total frames: RX=47, TX=92 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Cancelled : RX=0, TX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: DATA frames : RX=46, TX=44 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: DATA bytes : RX=638, TX=481 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Retry frames: RX=0, TX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: ACK frames : RX=0, TX=47 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: NAK frames : RX=0, TX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: nRdy frames : RX=0, TX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: CRC errors : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Comm errors : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Length < minimum: RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Length > maximum: RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Bad controls : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Bad lengths : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Bad ACK numbers : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Out of buffers : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Retry dupes : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Out of sequence : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: ACK timeouts : RX=0 [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: Port closed, error=null [2026-01-12 11:50:34] [32minfo[39m: zh:ember:uart:ash: ======== ASH stopped ======== [2026-01-12 11:50:34] [32minfo[39m: zh:ember:ezsp: ======== EZSP stopped ======== [2026-01-12 11:50:34] [32minfo[39m: zh:ember: ======== Ember Adapter Stopped ======== [2026-01-12 11:50:34] [32minfo[39m: z2m: Stopped zigbee-herdsman

Et donc je modifie le server mqtt://core-mosquitto part mqtts://core-mosquitto

Effectivement je viens de modifier la faute de frappe Et concrètement je m’excuse car je suis néophyte je fais comment pour corriger l’erreur Merci

En espérant que ça fonctionne le voici [2026-01-12 07:06:44] [32minfo[39m: zh:ember:uart:ash: ======== ASH connected ======== [2026-01-12 07:06:45] [32minfo[39m: zh:ember:uart:ash: ======== ASH started ======== [2026-01-12 07:06:45] [32minfo[39m: zh:ember:ezsp: ======== EZSP started ======== [2026-01-12 07:06:45] [32minfo[39m: zh:ember: Adapter EZSP protocol version (14) lower than Host. Switched. [2026-01-12 07:06:45] [32minfo[39m: zh:ember: Adapter version info: {"ezsp":14,"revision":"8.0.2 [GA]","build":397,"major":8,"minor":0,"patch":2,"special":0,"type":170} [2026-01-12 07:06:45] [32minfo[39m: zh:ember: [STACK STATUS] Network up. [2026-01-12 07:06:45] [32minfo[39m: zh:ember: [INIT TC] Adapter network matches config. [2026-01-12 07:06:45] [32minfo[39m: zh:ember: [CONCENTRATOR] Started source route discovery. 1247ms until next broadcast. [2026-01-12 07:06:45] [32minfo[39m: z2m: zigbee-herdsman started (resumed) [2026-01-12 07:06:45] [32minfo[39m: z2m: Coordinator firmware version: '{"meta":{"build":397,"ezsp":14,"major":8,"minor":0,"patch":2,"revision":"8.0.2 [GA]","special":0,"type":170},"type":"EmberZNet"}' [2026-01-12 07:06:45] [32minfo[39m: z2m: Currently 0 devices are joined. [2026-01-12 07:06:45] [32minfo[39m: z2m: Connecting to MQTT server at mqtt://core-mosquito [2026-01-12 07:06:45] [31merror[39m: z2m: MQTT failed to connect, exiting... (ENOENT: no such file or directory, open '/etc/ssl/mqtt-ca.crt') [2026-01-12 07:06:45] [32minfo[39m: z2m: Stopping zigbee-herdsman... [2026-01-12 07:06:46] [32minfo[39m: zh:controller: Wrote coordinator backup to '/config/zigbee2mqtt/coordinator_backup.json' [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: ASH COUNTERS since last clear: [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Total frames: RX=47, TX=92 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Cancelled : RX=0, TX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: DATA frames : RX=46, TX=44 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: DATA bytes : RX=638, TX=481 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Retry frames: RX=0, TX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: ACK frames : RX=0, TX=47 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: NAK frames : RX=0, TX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: nRdy frames : RX=0, TX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: CRC errors : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Comm errors : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Length < minimum: RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Length > maximum: RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Bad controls : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Bad lengths : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Bad ACK numbers : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Out of buffers : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Retry dupes : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Out of sequence : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: ACK timeouts : RX=0 [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: Port closed, error=null [2026-01-12 07:06:46] [32minfo[39m: zh:ember:uart:ash: ======== ASH stopped ======== [2026-01-12 07:06:46] [32minfo[39m: zh:ember:ezsp: ======== EZSP stopped ======== [2026-01-12 07:06:46] [32minfo[39m: zh:ember: ======== Ember Adapter Stopped ======== [2026-01-12 07:06:46] [32minfo[39m: z2m: Stopped zigbee-herdsman [07:06:48] INFO: [32mPreparing to start...[0m [07:06:48] INFO: [32mSocat not enabled[0m [07:06:49] INFO: [32mStarting Zigbee2MQTT...[0m Starting Zigbee2MQTT without watchdog. Onboarding page is available at http://0.0.0.0:8099/ [2026-01-12 07:27:36] [32minfo[39m: z2m: Logging to console, file (filename: log.log) [2026-01-12 07:27:37] [32minfo[39m: z2m: Starting Zigbee2MQTT version 2.7.2 (commit #unknown) [2026-01-12 07:27:37] [32minfo[39m: z2m: Starting zigbee-herdsman (8.0.1) [2026-01-12 07:27:37] [32minfo[39m: zh:ember: Using default stack config. [2026-01-12 07:27:37] [32minfo[39m: zh:ember: ======== Ember Adapter Starting ======== [2026-01-12 07:27:37] [32minfo[39m: zh:ember:ezsp: ======== EZSP starting ======== [2026-01-12 07:27:37] [32minfo[39m: zh:ember:uart:ash: ======== ASH Adapter reset ======== [2026-01-12 07:27:37] [32minfo[39m: zh:ember:uart:ash: RTS/CTS config is off, enabling software flow control. [2026-01-12 07:27:37] [32minfo[39m: zh:ember:uart:ash: Serial port opened [2026-01-12 07:27:37] [32minfo[39m: zh:ember:uart:ash: ======== ASH starting ======== [2026-01-12 07:27:39] [32minfo[39m: zh:ember:uart:ash: ======== ASH connected ======== [2026-01-12 07:27:39] [32minfo[39m: zh:ember:uart:ash: ======== ASH started ======== [2026-01-12 07:27:39] [32minfo[39m: zh:ember:ezsp: ======== EZSP started ======== [2026-01-12 07:27:39] [32minfo[39m: zh:ember: Adapter EZSP protocol version (14) lower than Host. Switched. [2026-01-12 07:27:39] [32minfo[39m: zh:ember: Adapter version info: {"ezsp":14,"revision":"8.0.2 [GA]","build":397,"major":8,"minor":0,"patch":2,"special":0,"type":170} [2026-01-12 07:27:39] [32minfo[39m: zh:ember: [STACK STATUS] Network up. [2026-01-12 07:27:39] [32minfo[39m: zh:ember: [INIT TC] Adapter network matches config. [2026-01-12 07:27:39] [32minfo[39m: zh:ember: [CONCENTRATOR] Started source route discovery. 1247ms until next broadcast. [2026-01-12 07:27:39] [32minfo[39m: z2m: zigbee-herdsman started (resumed) [2026-01-12 07:27:39] [32minfo[39m: z2m: Coordinator firmware version: '{"meta":{"build":397,"ezsp":14,"major":8,"minor":0,"patch":2,"revision":"8.0.2 [GA]","special":0,"type":170},"type":"EmberZNet"}' [2026-01-12 07:27:39] [32minfo[39m: z2m: Currently 0 devices are joined. [2026-01-12 07:27:39] [32minfo[39m: z2m: Connecting to MQTT server at mqtt://core-mosquito [2026-01-12 07:27:39] [31merror[39m: z2m: MQTT failed to connect, exiting... (ENOENT: no such file or directory, open '/etc/ssl/mqtt-ca.crt') [2026-01-12 07:27:39] [32minfo[39m: z2m: Stopping zigbee-herdsman... [2026-01-12 07:27:40] [32minfo[39m: zh:controller: Wrote coordinator backup to '/config/zigbee2mqtt/coordinator_backup.json' [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: ASH COUNTERS since last clear: [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Total frames: RX=47, TX=92 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Cancelled : RX=0, TX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: DATA frames : RX=46, TX=44 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: DATA bytes : RX=638, TX=481 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Retry frames: RX=0, TX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: ACK frames : RX=0, TX=47 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: NAK frames : RX=0, TX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: nRdy frames : RX=0, TX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: CRC errors : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Comm errors : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Length < minimum: RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Length > maximum: RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Bad controls : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Bad lengths : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Bad ACK numbers : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Out of buffers : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Retry dupes : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Out of sequence : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: ACK timeouts : RX=0 [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: Port closed, error=null [2026-01-12 07:27:40] [32minfo[39m: zh:ember:uart:ash: ======== ASH stopped ======== [2026-01-12 07:27:40] [32minfo[39m: zh:ember:ezsp: ======== EZSP stopped ======== [2026-01-12 07:27:40] [32minfo[39m: zh:ember: ======== Ember Adapter Stopped ======== [2026-01-12 07:27:40] [32minfo[39m: z2m: Stopped zigbee-herdsman [07:27:42] INFO: [32mPreparing to start...[0m [07:27:42] INFO: [32mSocat not enabled[0m [07:27:43] INFO: [32mStarting Zigbee2MQTT...[0m Starting Zigbee2MQTT without watchdog. Onboarding page is available at http://0.0.0.0:8099/

Bonjour à vous tous Donc comme indiqué dans mon poste précédent, j’ai commandé et reçu le matériel afin d’effectuer mes premiers pas dans ah Je l’ai installé configuré puis aussi Mosquitto broder, zigbee2mqtt, avec je pense une configuration correcte et lorsque je clic sur l’onglet zigbee2mqtt sur ma barre latérale, jai la dernière partie de configuration onboarding, et en bas de la page du submit Et quand je valide je change de page où est indiqué Settings saved Zigbee2mqtt is now starting You can close this page Et plus rien je reste sur cette page même Étant novice dans ha jai du faire une erreur quelques part Avez-vous un conseil à me donner Merci d’avance Philippe

Bonjour à vous tous Donc comme indiqué dans mon poste précédent, j’ai commandé et reçu le matériel afin d’effectuer mes premiers pas dans ah Je l’ai installé configuré puis aussi Mosquitto broder, zigbee2mqtt, avec je pense une configuration correcte et lorsque je clic sur l’onglet zigbee2mqtt sur ma barre latérale, jai la dernière partie de configuration onboarding, et en bas de la page du submit Et quand je valide je change de page où est indiqué Settings saved Zigbee2mqtt is now starting You can close this page Et plus rien je reste sur cette page même Étant novice dans ha jai du faire une erreur quelques part Avez-vous un conseil à me donner Merci d’avance Philippe

Bonsoir à vous tous Je compte faire mes premiers pas avec home assistant Je vous expose mon futur projet et vous me dites ce que vous en pensez me conseiller si il y des modifications à faire Je pense prendre une domotique NABU CASA - BOX DOMOTIQUE HOME ASSISTANT GREEN,afin de gérer mon installation Je veux débuter doucement avec des capteurs de température extérieure et intérieures, modèle:SONOFF - CAPTEUR DE TEMPÉRATURE ET D'HUMIDITÉ ZIGBEE 3.0 AVEC ÉCRAN SNZB-02D (COMPATIBLE ZIGBEE2MQTT),aussi deux autres sondes pour la température de la piscine et du jacuzzi extérieur, modèle:OWON - SONDE DE TEMPÉRATURE DÉPORTÉE SUR CÂBLE ZIGBEE Et pour terminer pour gérer la recharge de mon véhicule électrique, installer un:module tongou zigbee to-q-sy1-jwt, afin de pouvoir charger la voiture en heure creuse avec des horaires programmables Et pour terminer pour qu’une relation se fasse bien entre tous les systèmes installer une antenne:SMLIGHT - ADAPTATEUR USB ETHERNET POE ZIGBEE ET THREAD CC2674P10 + EFR32MG26 SLZB-MR4 Qu’en pensez-vous, de cette installation, en faisant des scénarios simple Je vous remercie. Philippe

Bonjour, à tous, merci de m’accueillir dans votre forum, je me permettrai de vous poser des questions, je souhaiterais débuter d’un Home Assistant et je n’ai aucune connaissance informatique,mais d’après votre tutoriel, je devrais pouvoir m’en sortir Philippe

Ce tutoriel était excellent, ça m’a permis de m’éclaircir beaucoup de choses